Specifications --></p> <p><!-- Included in your kit: Component Description UHMW Tail Arm A custom machined 1/4in thick UHMW Tail Arm with twelve mounting holes to attach everything. UHMW Motor Guard 1/8in thick UHMW Motor Guard with mounting holes and slots, to bend around the weapon motor. Weapon Motor 2822-1100KV Brushless Motor (4mm shaft) Screws Weapon Controller 20A Brushless Speed Controller Angled Motor Mount The Angled F2822 Motor Mount fastens the motor solidly and aligns the blade with the floor. Blade Mount FingerTech Blade Mount fastens directly to the motor body for maximum strength. Blade A 3.5in Asymetric Titanium Blade is sharp and light and can be whipped around extremely fast! Armor New UHMW Front Armor to absorb the opponent’s attack, leaving them open to side swipes. Fasteners All the screws (4pcs 6-32 x 1/4in, 4pcs 6-32 x 1/2in, 3pcs 4-40 x 1/2in, 4pcs 4-40 x 3/8in Screws) and a 1/16in Hex Wrench Kit Weight 138grams (4.84oz) with UHMW front armor. Total Viper Weight with Kit 433g (15.27oz) with a 300mAh 2S lipoly, or 440g (15.52oz) with a 300mAh 3S lipoly. (9V battery not recommended to power this Add-On. Voltage 7.4V – 11.1V. The 7.4V 300mAh 3s battery, used in the Viper works great- any 3S lipoly will give your weapon extra oomph! Instructions Detailed instructions with pictures: Viper-T-Spinner-add-on-R1.pdf Notes: A 9V battery is not recommended to power this Add-On. If you want to swap to a different Weapon Blade, the FingerTech Blade Mount fits all of our custom blades and the Tail Spinner can fit anything up to 10inch diameter (but check your weight!) Requires: Phillips screwdriver #2 Threadlock liquid Electrical tape, zipties, or cable-ties Weapon safety lock
