What is B-I-N® Shellac Primer? A shellac primer is a stain-blocking primer that is especially effective at tackling tough stains such as water, smoke and tannin bleed. Shellac based primers provide excellent adhesion, even to challenging surfaces such as glossy plastics, metal and ceramic tiles. B-I-N® is the ultimate primer, sealer and stain killer. It offers unparalleled adhesion on any surface without sanding and has the hiding power to conceal the toughest of stains. B-I-N® effectively blocks odours, dries in minutes and is perfect for use on interior surfaces and spot priming of exterior surfaces. Key Features of B-I-N® B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. The shellac primer works brilliantly on water stains, fungal degradation, nicotine, oil stains, marker pen stains and more. B-I-N® effectively seals and blocks all types of odours (from smoke and fire damage to odours from pets and nicotine). Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Main Features: Ultimate performance, shellac-based primer-sealer Stain-blocking primer Effectively blocks odours Unparalleled adhesion to any surface without sanding For interior and spot exterior use Seals knots and sap streaks Dries in just 15 minutes Recoatable in 45 minutes What Surfaces can B-I-N Shellac Primer be used on? B-I-N® can be used on a variety of surfaces including, interior ceilings, walls, doors and more. It’s perfect for spot priming exterior metal, trims, PVC and wood. Can you Spray Zinsser B-I-N? Yes, B-I-N® can be applied using an airless or conventional sprayer. How do I apply B-I-N? Preparation and surface cleaning Make sure that surfaces are clean, dry and free of dust, dirt, grease, mildew, or any contaminants that could affect the paint adhesion. Remove loose, flaking material and sand rough edges for a smooth finish. Application techniques B-I-N® is easy to apply with a brush, roller or pad and can also be applied using an airless or conventional sprayer. In most cases, only one coat is necessary to prime most surfaces however, when priming very porous substrates a second coat might be required. Stir well before applying. Drying and recoating times B-I-N® is touch dry in 15 minutes and re-coatable in 45 minutes, with a full cure time of 1-3 days. Clean up instructions Clean up spills and drips with denatured alcohol or ammoniated detergent. Wash tools in a solution of 1 part ammonia and 3 parts water immediately after use. If the primer has dried, soak overnight and scrub clean with a stiff brush. Use Zinsser B-I-N Brush Cleaner to remove dried paint on brushes. B-I-N Safety Datasheet
