Sale!

PUK-D6 Dental Welder

$ 98.22

Discount Rule: Q(6-9) - 3%; Q(10-25) -5%; Q(26-49) - 8%; Q(50-99) -10%; Q(100-199) - 14%

2XS
XS
S
M
L
XL
2XL
3XL
4XL
5XL
6XL
Dental Welder PUK D6 The PUK D6, the welding machine for dental laboratories, is compact & versatile, designed specifically for dental applications & alloys. All welding tasks in the daily routine of a dental laboratory, which could otherwise only be performed with a laser can be performed with this dental welding unit. Strong & long-lasting heat exposure during conventional TIG welding or brazing with the flame is often undesirable or intolerable in dental technology. The new Lampert PUK D6 dental welder not only saves time, but also avoids unnecessary material consumption. Fine welding with the PUK D6, unlike brazing, uses alloys of the same type & thus avoids any unnecessary mix of materials. This ensures biocompatibility in both the fabrication & repair of dental restorations. When precision, reliability & controllability are required, the PUK D6 is the first choice, making it the ideal complement to CAD/CAM design & additive processes as well as classic casting techniques. In addition to the classic TIG micro-pulse welding technique, the PUK D6 also offers the practical & proven retention welding function for fast & stable denture repairs or extensions. The display of the PUK D6 with high colour brilliance & transparent display of the performance parameters Clear design language with timeless aesthetics as a visual highlight at every workstation in the dental laboratory Noble, selected materials for highest demands on value & appearance 70 % higher display resolution with increased viewing angle under all ambient conditions on the new Lampert PUK D6 dental welding unit Optimum welding curves for all common available dental alloys Higher maximum power & improved welding performance – especially with highly conductive alloys – thanks to the new speed function New standby function – fast restart, minimal energy consumption Single-screen menu for intuitive & fast selection of the right performance parameters through direct control with one-hand joystick with turn-push-tilt function Faster maximum spot weld sequence due to extended speed function – selectable in 3 levels Refined micro mode with narrower gradation enables extended spectrum when welding at the lower power limit, e.g. in orthodontics Newly designed, patented welding process control for avoiding faulty welds & learning PUK welding even faster     Simple, time-saving & inexpensive procedure to produce stable retention pins in just a few seconds. (Ø 1.2 – 2 mm) to be welded onto existing dentures – for repairs, extensions or new fabrications. In a fraction of a second, a special adapter is used to create an extremely stable connection – without any significant heat development on the denture. No re-welding & no post-processing of the weld or its surroundings necessary. As a result, cast partial repairs or extensions can be completed much faster for the dental technician than with conventional techniques. Help for safe work with difficult workpiece constructions Simple activation: Press the foot switch for 3 seconds – blue symbol appears in the display – welding is now triggered by pressing the foot switch, similar to laser welding. Very simple & efficient method for fixing dental workpieces for final welding or soldering. E.g. for a fixation weld of a separated bridge or other dental prosthesis on the working model or to fix wire & construction elements for orthodontic appliances. Joining of two metal parts at their point of contact by means of resistance welding – the parts can thus be tacked together for final joining by means of PUK fine welding, or to fix them for a soldering process. Especially suitable for machining metals with low electrical conductivity, e.g. stainless steel or titanium. Possibility of welding material thicknesses of even less than 0.2 mm, e.g. wires or orthodontic bands, in an even more controlled manner for very delicate dental restorations. A significantly faster welding cycle enables the dental technician to work even more continuously. Possibility to shape applied material as desired or also to greatly improve the fine welding properties of particularly thermally conductive dental alloys. PUK fine welding in dental laboratories For daily use: Extremely short welding pulse times enable high-quality welded joints with the new dental welder on workpieces < 0.15 mm material thickness . e.g. in orthodontic constructions) as well as in heat-sensitive areas (e.g. e.g. in the vicinity of plastic or ceramic parts). Due to the wide performance range of the PUK D6, stable welded joints can be produced even on very massive parts such as bridges, bars & model cast prostheses. It is recommended to use appropriate welding wires for this purpose Get results faster: “Blind operation” through one-hand operation: Concentration remains on the workpiece! Even more powerful LED illumination in our new premium welding microscopes. More uniform illumination of the working area – more flexible use of the microscope: These microscopes can also be used as full-fledged working microscopes – not only for welding! New: Setting of all functions, the parameters power, pulse duration & menu navigation with only one joystick rotary control Individual welding device setup via the settings menu Very low, controllable heat generation Fast amortization for dental laboratories: Low acquisition costs for the PUK D6 dental welder Very good price-performance ratio Facilitation & time savings during repairs & soldering Low costs for consumables Low argon consumption Maintenance free technology   Current (TIG) min./max. 9 – 440 A Pulse duration (TIG) min./max. 0.1 – 34 ms Current (fixation welding) min./max. 80 – 700 A Pulse duration (fusion welding) 1.5 ms Welding speed up to 3 Hz max. Loading time 0,8 s Number of metal programs 10 Range display with recommended settings High frequency welding Automatic gas pre-flow time Gas consumption approx. 2 l/min Inert gas Argon > 99.9 % e.g. Argon 4.6 Power consumption during welding 400 VA Power consumption during idle operation 7 W Weight 10,4 kg     PUK-D6 Dental Welder March 17th, 2026ThinnPro

SHIPPING & RETURN

Freight Guide

Breelyn Uniforms offer flat Shipping $12 for orders Australia wide. Breelyn Uniforms primarily use Courier Please and Australia Post to deliver orders within Australia.


Delivery Time Guide

Delivery within Australia is normally between 2 to 10 working days for product orders without ornamental service (depending on your location). For orders with ornamental services, such as Embroidery and Screen Printing etc., normal delivery time should also plus the time for ornamental services. 

From time to time, we cannot guarantee that delivery will occur in the delivery time frames specified in above. Delivery time frames may change from time to time due to unforeseen circumstances; and the Company is not liable with respect to any loss, damage, cost, expense or injury you or any third party suffers as a result of a change in delivery times or a delay in delivery.

We will contact you if there will be significant delivery delay.


Time Guide For Ornamental Services

Embroidery:

Embroidery Sample Preparation: ~ 5 working days from Order Confirmation, Payment and Digital Mock Up Approval..

Production: 7-10 Working Days from Order Confirmation, Payment and Embroidery Sample Approval.

Screen Printing:

Screen Printing Artwork Preparation: ~ 3 Working Days from provision of Artwork (Vector format artwork such as AI, PDF), Order Confirmation and Payment.

Production: 7-10 Working Days from Order Confirmation, Payment and Artwork Approval.

Dye Sublimation:

Sublimation Product Sample: ~10 working days from Order Confirmation, Artwork Approval and Payment.

Production: 4-5 weeks from Order Confirmation, Payment and Product Sample Approval.

We are capable to handle urgent orders. You are welcome to enquire with detail requirement by email: [email protected] or phone: 1300 786 168.

Delivery and Title

Delivery of Goods will take place at the Delivery Address specified by the Customer during the Order process. We shall at the Customer’s expense deliver the goods to this address.

If there is no one available at the Delivery Address to accept delivery, or there is limited access to the Delivery Address or it is unsafe or impractical to make delivery, a calling card will be left for the Customer. It is the Customer’s responsibility to follow the instructions stated on the calling card.

Where the Customer do not collect your Goods or call the Courier Company within 5 days of a failed delivery, it may cause return of the Customer’s Goods and re-delivery. If Goods are required to be redelivered, the Customer will be required to pay any associated fees for redelivery.

The Customer may nominate to have the parcel left without a signature (e.g. on door step). However, if the Customer do so, the Customer understand and agree that our selected couriers are permitted to leave the Order without obtaining a signature, therefore we and our couriers are released of all responsibility and liability for the Orders left unattended.

Please note that it might not be possible for us to deliver to some locations. If this is the case, we will inform the Customer and arrange for cancellation of the Order or delivery to an alternative delivery address.

Upon delivery, the Customer must inspect your Goods and check that the Goods delivered match your Order. If the Customer find any damage, missing, faulty or incorrect goods, the Customer need contact our Customer Service Team as soon as possible on 1300 786 168 (Australia Customer) or 0061 2 9671 5929 (Customer outside Australia) and email us at [email protected] referring to official invoice number and date, and state what happened on the Goods. If you request return of goods, please refer to our Returns Policy at below.

Returns & Claims

All return goods must be authorized by the Company. The Customer shall email the Company at [email protected] of any claim within 14 days after the receipt of Goods.


Return of Defective Goods

Breelyn Uniforms gives up to 90 days warranty against manufacturer defects and quality failure. This warranty does not cover general wear and tear from use, other accidents or incidents. 

If the Goods are defective or fail to be of acceptable quality, the Company will repair or replace the goods or any part of them that is defective at our discretion.

The Customer should follow up the Garment Care Instruction on each garment. 

The Company offer Free Return service for defective Goods. After return request is authorized by the Company, the Customer can return the defective Goods at local Post Office by using Reply Paid Form provided by the Company for free return.

If you have received Goods with defect, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] referring to official invoice number and date, and state what happened on the Goods within the warranty period. Our Customer Service team will contact you within 2 business days after received your email. We may request you to provide one photo or two showing the defect/fault, which will speed up the returns process for you.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number and Reply Paid Form as a pdf. Return Authorization Number is valid for 2 weeks. Print this Reply Paid Form off and attach it to your return parcel.

Step 3: Drop off your package at any Australia Post office for free return.

Step 4: We will make inspection after receipt of the Goods and will contact you with the solution on the defects.

Step 5: After repair or replacement of the Goods, we will send the Goods back to you at our own expenses.

The Company’s liability, implied warranty or condition is limited to the replacement or repair of Goods at the Company’s sole discretion.

 

If You Changed Your Mind

We will not accept return or exchange of Goods already decorated or with Special Sale Terms, such as Special or Clearance Goods. We will not accept return or exchange of items that custom made or produced through indent.

The Customer can request return of Goods other than above. There is minimum $15 restocking fee to apply.

 If you want to return the Goods simply because you changed your mind, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] within 7 days after the receipt of Goods, referring to official invoice number and date, and state reason for return. Our Customer Service team will contact you within 2 business days after received your email.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number which is valid for 2 weeks.

Step 3: Return the Goods to the Company. Please enclose Return Authorization Number, Copy of Invoice with your return Goods and address to:

Breelyn Uniforms Returns Centre
PO Box 423, Doonside NSW 2767.
Australia

Freight cost for return of purchased Goods will be the responsibility of the Customer. If the return parel does not reach us safely, we cannot complete the Refund or Credit procedure, so please send via trackable or registered post.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: For return Goods with sound condition, we will proceed to Refund or Credit into your account. The Freight cost in original order is non-refundable.

Refunds are processed within 5 business days after receipt of the Goods. You'll receive a confirmation email once your refund or exchange is done!

For Credit Card or PayPal payment, refund will be credited into the same account your payment came from.

If You Want to Exchange for Different Size or Different Goods.

We will not accept return or exchange of Goods already decorated or with Special Sale Terms, such as Special or Clearance Goods. We will not accept return or exchange of items that custom made or produced through indent.

The Customer can request exchange of Size or Goods other than above. There is minimum $15 restocking fee to apply.

If you would like to exchange for a different size or different Goods, you need to return your purchase to initiate a refund and place a new order as following:

Step 1: The Customer shall email the Company at [email protected] within 7 days after the receipt of Goods, referring to official invoice number and date, and state reason for return. Our Customer Service team will contact you within 2 business days after received your email.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number which is valid for 2 weeks.

Step 3: Return the Goods to the Company. Please enclose your Return Authorization Number, Copy of Invoice with your return Goods and address to

Breelyn Uniforms Returns Centre
PO Box 423, Doonside NSW 2767.
Australia

Freight cost for return of purchased Goods will be the responsibility of the Customer. If the return parcel does not reach us safely, we cannot complete the Refund or Credit procedure, so please send via trackable or registered post.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: For return Goods with sound condition, we will proceed to Refund or Credit into your account. The Freight cost in original order is non-refundable.

Refunds are processed within 5 business days after receipt of the Goods. You'll receive a confirmation email once your refund is done!

For Credit Card or PayPal payment, refund will be credited into the same account your payment came from.

If Part of the Goods are Missing

If you find parts of the Goods missing, please follow the procedure at below for re-supply:

Step 1: The Customer shall email the Company at [email protected] within 14 days after the receipt of Goods, referring to official invoice number and date, and state what Goods are missing in the delivery. Our Customer Service team will contact you within 2 business days after receipt of your email. The Customer shall check the Goods thoroughly and carefully before claim.

Step 2: After the assessment, the Company will re-supply the missing Goods within normal delivery time.

If Received Goods Are Incorrect

If you find the received Goods are incorrect, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] within 14 days after the receipt of Goods, referring to official invoice number and date, and state incorrect Goods in delivery. Our Customer Service team will contact you within 2 business days after received your email. We may request you to provide one photo or two showing the Goods that are incorrect, which will speed up the returns process for you.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number and Reply Paid Form as a pdf. Return Authorization Number is valid for 2 weeks. Print this Reply Paid Form off and attach it to your return parcel.

 

Step 3: Drop off your package at any Australia Post office for free return.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: We will re-supply the right Goods for replacement at our own expenses.

For any queries, please contact our Customer Service Team on 1300 786 168 (Australia Customer) or 0061 2 9671 5929 (Customer outside Australia) and email us at [email protected].