Sale!

Colron Wood Dye – 250ml

$ 12.50

Discount Rule: Q(6-9) - 3%; Q(10-25) -5%; Q(26-49) - 8%; Q(50-99) -10%; Q(100-199) - 14%

2XS
XS
S
M
L
XL
2XL
3XL
4XL
5XL
6XL
Description Colron Wood Dye is a water based acrylic wood stain designed to highlight the natural beauty of wood. Colron Refined Wood Dye is available in a range of traditional colours that compliment any interior wood. This wood dye provides a long lasting, fade resistant, rich depth of colour for the decoration of interior woods and is low odour, with rapid drying times. One coat is normally sufficient however the depth of colour can be increased by the application of further coats. Colron Refined Wood Dye is recommended for the colouring of most interior wood including furniture, tables, floors, doors, skirting boards and wood paneling. How to use Colron Wood Dye Ensure that wood is bare, clean, dry and free of any dust, dirt or other surface contaminants. Any previously applied finish such as paint, varnish, seal polish or wax must be completely removed. Prepare the surface well. Colron Refined Wood Dye and compatible varnishes provide a transparent finish any marks, blemishes or stains in the substrate will show through. Any dis-coloured wood should be sanded until an original surface is visible. Sand lightly in the direction of the grain taking care not to over sand or “polish” the surface. Oily hardwoods such as teak, resinous areas and knots should be thoroughly washed with white spirit. Remove any dust using a brush or vacuum cleaner and wipe the surface using a cloth soaked with white spirit. Allow to dry thoroughly. Test colour on a small but representative area or off-cut prior to application. Shake bottle well before use. Colron Wood Dye can be applied with a soft lint free cloth or sponge. When treating large areas such as doors or floors apply the dye one length of floorboard or a section of door at a time to avoid overlaps, work quickly to maintain a wet edge. Application by cloth or sponge will result in a lighter shade. A one coat application is normally sufficient, but colour may be intensified and a more even finish achieved by the application of further coats. Allow 1 hour between coats. Do not apply more than three coats. Once you are happy with the colour, Seal the dye using the appropriate finish. Colron Wood Dye Colours Georgian Medium OakAntique PineEnglish Light OakJacobean Dark OakDeep MahoganyIndian RosewoodAmerican Walnut Please note – The colour swatches are only a guide and may look different depending on the type of wood and application method. COVERAGE Up to 16m²/litre. Coverage rate will vary depending on the absorbency of the substrate. DRYING TIME – Colron Refined Wood Dye is touch dry in 20 minutes and can be over-coated after 1 hour. Drying and re-coating times may vary with temperature, relative humidity and absorbency of the substrate. CLEANING OF TOOLS – All equipment should be cleaned immediately after use with water and detergent. Remove as much product as possible from equipment prior to cleaning. Do not use Colron Wood Dye on plastic type materials, such as linoleum, thermoplastics, asphalt and PVC rubber, etc. Clean splashes and spillages with water and detergent whilst wet. Do not apply in direct sunlight. Do not apply in temperatures below 10°C or in high humidity. Certain tropical hardwoods have surfaces which may prevent full absorbency. If a number of individual packs of Colron Wood Dye are to be used at the same time, always mix the contents of all packs together to avoid the possibility of slight colour variations. Colron Refined Wood Dye has minimal obliterative properties and its use will always darken wood. The final colour depends on the type, colour and absorbency of the substrate. Always test for colour suitability on a small, inconspicuous but representative area. All Colron Refined Wood Dyes are inter-mixable for colour matching purposes. When constructing new woodwork or rebuilding old, take care to ensure no excess adhesive is squeezed from joints over adjoining areas, as this will prevent absorption of Wood Dye, resulting in lighter coloured patches. STORAGE – Store in a cool, dry, well ventilated place away from heat and sources of ignition. Store upright and carefully reseal partly used containers. The shelf life of the product in airtight containers is at least 3 years. Protect from frost. Store above 5°C. DISPOSAL – Some local authorities have special facilities for the disposal of waste paints/varnishes. Do not empty product into drains or watercourses. Questions and Answers Can I intermix Colron Wood Dye colours to make a bespoke shade? Yes, Colron Refined Wood Dye is inter-mixable as long as it is only mixed with the same wood dye range. It is not recommended to mix this with any other brand or you may have adverse reactions. Ensure you shake well before and during use to get an even shade. Also ensure you mix enough to complete your job to ensure there are no variations in colour. What is best to seal Colron Wood Dye? Colron offer a range of finishing products that are ideal to seal your wood dye colour. You must ensure the dye is 100% dry before adding a seal coat. Colron Danish oil or Colron Beeswax are both ideal as they come in several tinted shades if you want to add more colour but they will still keep the wood grain visible for a more natural look. Can you use Colron Wood Dye on exterior wood? No, this is not suitable for exterior use as it has very little UV resistance so the colour will fade. Also there is no water resistant properties in this product so it would need a suitable seal coat. We would only recommend to use this on interior use with a good top coat to seal in the colour. Colron have a good selection of finishing products which can be found here. HEALTH AND SAFETY Observe and follow all warnings and instructions for use shown on the pack. Use only in well ventilated areas. Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleaner. Wear suitable gloves. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect from frost. Keep out of reach of children. Specific health and safety data sheets are available on request. Safety Data Sheets Safety Data

SHIPPING & RETURN

Freight Guide

Breelyn Uniforms offer flat Shipping $12 for orders Australia wide. Breelyn Uniforms primarily use Courier Please and Australia Post to deliver orders within Australia.


Delivery Time Guide

Delivery within Australia is normally between 2 to 10 working days for product orders without ornamental service (depending on your location). For orders with ornamental services, such as Embroidery and Screen Printing etc., normal delivery time should also plus the time for ornamental services. 

From time to time, we cannot guarantee that delivery will occur in the delivery time frames specified in above. Delivery time frames may change from time to time due to unforeseen circumstances; and the Company is not liable with respect to any loss, damage, cost, expense or injury you or any third party suffers as a result of a change in delivery times or a delay in delivery.

We will contact you if there will be significant delivery delay.


Time Guide For Ornamental Services

Embroidery:

Embroidery Sample Preparation: ~ 5 working days from Order Confirmation, Payment and Digital Mock Up Approval..

Production: 7-10 Working Days from Order Confirmation, Payment and Embroidery Sample Approval.

Screen Printing:

Screen Printing Artwork Preparation: ~ 3 Working Days from provision of Artwork (Vector format artwork such as AI, PDF), Order Confirmation and Payment.

Production: 7-10 Working Days from Order Confirmation, Payment and Artwork Approval.

Dye Sublimation:

Sublimation Product Sample: ~10 working days from Order Confirmation, Artwork Approval and Payment.

Production: 4-5 weeks from Order Confirmation, Payment and Product Sample Approval.

We are capable to handle urgent orders. You are welcome to enquire with detail requirement by email: [email protected] or phone: 1300 786 168.

Delivery and Title

Delivery of Goods will take place at the Delivery Address specified by the Customer during the Order process. We shall at the Customer’s expense deliver the goods to this address.

If there is no one available at the Delivery Address to accept delivery, or there is limited access to the Delivery Address or it is unsafe or impractical to make delivery, a calling card will be left for the Customer. It is the Customer’s responsibility to follow the instructions stated on the calling card.

Where the Customer do not collect your Goods or call the Courier Company within 5 days of a failed delivery, it may cause return of the Customer’s Goods and re-delivery. If Goods are required to be redelivered, the Customer will be required to pay any associated fees for redelivery.

The Customer may nominate to have the parcel left without a signature (e.g. on door step). However, if the Customer do so, the Customer understand and agree that our selected couriers are permitted to leave the Order without obtaining a signature, therefore we and our couriers are released of all responsibility and liability for the Orders left unattended.

Please note that it might not be possible for us to deliver to some locations. If this is the case, we will inform the Customer and arrange for cancellation of the Order or delivery to an alternative delivery address.

Upon delivery, the Customer must inspect your Goods and check that the Goods delivered match your Order. If the Customer find any damage, missing, faulty or incorrect goods, the Customer need contact our Customer Service Team as soon as possible on 1300 786 168 (Australia Customer) or 0061 2 9671 5929 (Customer outside Australia) and email us at [email protected] referring to official invoice number and date, and state what happened on the Goods. If you request return of goods, please refer to our Returns Policy at below.

Returns & Claims

All return goods must be authorized by the Company. The Customer shall email the Company at [email protected] of any claim within 14 days after the receipt of Goods.


Return of Defective Goods

Breelyn Uniforms gives up to 90 days warranty against manufacturer defects and quality failure. This warranty does not cover general wear and tear from use, other accidents or incidents. 

If the Goods are defective or fail to be of acceptable quality, the Company will repair or replace the goods or any part of them that is defective at our discretion.

The Customer should follow up the Garment Care Instruction on each garment. 

The Company offer Free Return service for defective Goods. After return request is authorized by the Company, the Customer can return the defective Goods at local Post Office by using Reply Paid Form provided by the Company for free return.

If you have received Goods with defect, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] referring to official invoice number and date, and state what happened on the Goods within the warranty period. Our Customer Service team will contact you within 2 business days after received your email. We may request you to provide one photo or two showing the defect/fault, which will speed up the returns process for you.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number and Reply Paid Form as a pdf. Return Authorization Number is valid for 2 weeks. Print this Reply Paid Form off and attach it to your return parcel.

Step 3: Drop off your package at any Australia Post office for free return.

Step 4: We will make inspection after receipt of the Goods and will contact you with the solution on the defects.

Step 5: After repair or replacement of the Goods, we will send the Goods back to you at our own expenses.

The Company’s liability, implied warranty or condition is limited to the replacement or repair of Goods at the Company’s sole discretion.

 

If You Changed Your Mind

We will not accept return or exchange of Goods already decorated or with Special Sale Terms, such as Special or Clearance Goods. We will not accept return or exchange of items that custom made or produced through indent.

The Customer can request return of Goods other than above. There is minimum $15 restocking fee to apply.

 If you want to return the Goods simply because you changed your mind, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] within 7 days after the receipt of Goods, referring to official invoice number and date, and state reason for return. Our Customer Service team will contact you within 2 business days after received your email.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number which is valid for 2 weeks.

Step 3: Return the Goods to the Company. Please enclose Return Authorization Number, Copy of Invoice with your return Goods and address to:

Breelyn Uniforms Returns Centre
PO Box 423, Doonside NSW 2767.
Australia

Freight cost for return of purchased Goods will be the responsibility of the Customer. If the return parel does not reach us safely, we cannot complete the Refund or Credit procedure, so please send via trackable or registered post.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: For return Goods with sound condition, we will proceed to Refund or Credit into your account. The Freight cost in original order is non-refundable.

Refunds are processed within 5 business days after receipt of the Goods. You'll receive a confirmation email once your refund or exchange is done!

For Credit Card or PayPal payment, refund will be credited into the same account your payment came from.

If You Want to Exchange for Different Size or Different Goods.

We will not accept return or exchange of Goods already decorated or with Special Sale Terms, such as Special or Clearance Goods. We will not accept return or exchange of items that custom made or produced through indent.

The Customer can request exchange of Size or Goods other than above. There is minimum $15 restocking fee to apply.

If you would like to exchange for a different size or different Goods, you need to return your purchase to initiate a refund and place a new order as following:

Step 1: The Customer shall email the Company at [email protected] within 7 days after the receipt of Goods, referring to official invoice number and date, and state reason for return. Our Customer Service team will contact you within 2 business days after received your email.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number which is valid for 2 weeks.

Step 3: Return the Goods to the Company. Please enclose your Return Authorization Number, Copy of Invoice with your return Goods and address to

Breelyn Uniforms Returns Centre
PO Box 423, Doonside NSW 2767.
Australia

Freight cost for return of purchased Goods will be the responsibility of the Customer. If the return parcel does not reach us safely, we cannot complete the Refund or Credit procedure, so please send via trackable or registered post.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: For return Goods with sound condition, we will proceed to Refund or Credit into your account. The Freight cost in original order is non-refundable.

Refunds are processed within 5 business days after receipt of the Goods. You'll receive a confirmation email once your refund is done!

For Credit Card or PayPal payment, refund will be credited into the same account your payment came from.

If Part of the Goods are Missing

If you find parts of the Goods missing, please follow the procedure at below for re-supply:

Step 1: The Customer shall email the Company at [email protected] within 14 days after the receipt of Goods, referring to official invoice number and date, and state what Goods are missing in the delivery. Our Customer Service team will contact you within 2 business days after receipt of your email. The Customer shall check the Goods thoroughly and carefully before claim.

Step 2: After the assessment, the Company will re-supply the missing Goods within normal delivery time.

If Received Goods Are Incorrect

If you find the received Goods are incorrect, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] within 14 days after the receipt of Goods, referring to official invoice number and date, and state incorrect Goods in delivery. Our Customer Service team will contact you within 2 business days after received your email. We may request you to provide one photo or two showing the Goods that are incorrect, which will speed up the returns process for you.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number and Reply Paid Form as a pdf. Return Authorization Number is valid for 2 weeks. Print this Reply Paid Form off and attach it to your return parcel.

 

Step 3: Drop off your package at any Australia Post office for free return.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: We will re-supply the right Goods for replacement at our own expenses.

For any queries, please contact our Customer Service Team on 1300 786 168 (Australia Customer) or 0061 2 9671 5929 (Customer outside Australia) and email us at [email protected].