Sale!

Liberon Spirit Wood Dye

$ 11.91

Discount Rule: Q(6-9) - 3%; Q(10-25) -5%; Q(26-49) - 8%; Q(50-99) -10%; Q(100-199) - 14%

2XS
XS
S
M
L
XL
2XL
3XL
4XL
5XL
6XL
Description Liberon Spirit Wood Dye is ideal for furniture restoration and polishing. Liberon Spirit Wood Dye comes in two different sizes, 250ml or 1 Litre tins. It is a traditional Wood Stain / Dye for colouring hardwoods such as Mahogany, Walnut and Oak but can also be used on some soft woods. It penetrates deep into the wood and can be mixed together to obtain intermediate shades. This wood stain is easy to apply and with a new ethanol-based formula, it comes in a range of superb colours. How to use Liberon Spirit Wood Dye 1. Ensure the surface is clean, dry and free from any dust, dirt or any other surfaces contaminants. 2.This dye is mainly used on unsealed bare woods. If stripping of a previous finish is required, see our helpful guide here. Liberon Fine Wood Stripper with Steel Wool, is ideal for this. 3. Fill any holes, splits or gaps with a Wood Filler or smaller chips with a Wax Filler. Make sure all the wood has been correctly sanded to a smooth finish and dust. 4. Shake the wood dye tin very well before use and ensure you have enough stain to finish the entire job before starting or it may dry patchy. If more than one tin of dye is required to complete the work, mix the tins together to ensure a consistent colour. 5. Apply one moderate coat of Liberon Spirit Wood Dye with a lint-free cloth in the direction of the grain of the wood and then allow to fully dry. More coats can be applied to darken the wood but ensure it is full dry between coats. 5. Leave for at least five hours between coats. 6. On some woods the second coat of stain may remove the first coat, so test a small area first. 7. When you are happy with the colour you can finish with a water based varnish, French polish, wax or oil. 8. When applying a French polish, Shellac sealer or varnish, be careful as over brushing may remove the stain. Liberon Spirit Wood Dye Colours Antique PineLight OakMedium OakTeakWalnutDark OakGeorgian MahoganyEbony Please note – Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer’s instructions on the tin at all times. Ensure sure you have sufficient dye to finish the work. Do not mix spirit based dyes with water based dyes or white spirit based dyes. Application of a second coat may lift the first coat. Caution must be taken when using oil based finishes over Liberon Spirit Wood Dye. Keep brush strokes to a minimum as over brushing may lift out the colour. Different types of wood produce different results. The colour example on the photos may not be a true representation of the actual colour as different woods will produce different shades. Each 1 Litre tin covers approximately 8-16 m2. Clean equipment with Methylated Spirit. Questions and Answers Does Spirit Wood Dye raise the grain of the wood? Any spirit based wood dye can raise the grain on certain woods, especially soft wood but as long as you apply with thin coats, this will reduce the risk. Always test a small area first to ensure compatibility. What is the difference between Palette Wood Dye and Spirit Wood Dye? Liberon Spirit Wood Dye is an ethanol-based dye suitable for use on new and reclaimed timbers and may be over-coated with a wax, oil or varnish. Because it is ethanol based it is high in Volatile Organic compounds (VOC). Liberon Palette Wood Dye is water based so is low in VOC but does not have as good coverage on hard woods. Personally I think the Spirit Wood Dye is far better at coverage and offers a better tint. How many Liberon Spirit Wood Dye coats do you recommend? It is recommended to apply one liberal coat of Spirit Wood Dye and allow the stain to penetrate into the wood. Then remove any excess with a clean lint free cloth. You can add a thin second coat if required, but this needs to be done in quick strokes and thinly. The first coat must be 100% before adding additional coats. Heath and Safety Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Keep out of the reach of children. Keep away from sources if ignition – No smoking. Do not empty into drains. Wear suitable protective clothing and gloves. Use only in well ventilated areas. Safety Data Sheets Safety Data Sheet

SHIPPING & RETURN

Freight Guide

Breelyn Uniforms offer flat Shipping $12 for orders Australia wide. Breelyn Uniforms primarily use Courier Please and Australia Post to deliver orders within Australia.


Delivery Time Guide

Delivery within Australia is normally between 2 to 10 working days for product orders without ornamental service (depending on your location). For orders with ornamental services, such as Embroidery and Screen Printing etc., normal delivery time should also plus the time for ornamental services. 

From time to time, we cannot guarantee that delivery will occur in the delivery time frames specified in above. Delivery time frames may change from time to time due to unforeseen circumstances; and the Company is not liable with respect to any loss, damage, cost, expense or injury you or any third party suffers as a result of a change in delivery times or a delay in delivery.

We will contact you if there will be significant delivery delay.


Time Guide For Ornamental Services

Embroidery:

Embroidery Sample Preparation: ~ 5 working days from Order Confirmation, Payment and Digital Mock Up Approval..

Production: 7-10 Working Days from Order Confirmation, Payment and Embroidery Sample Approval.

Screen Printing:

Screen Printing Artwork Preparation: ~ 3 Working Days from provision of Artwork (Vector format artwork such as AI, PDF), Order Confirmation and Payment.

Production: 7-10 Working Days from Order Confirmation, Payment and Artwork Approval.

Dye Sublimation:

Sublimation Product Sample: ~10 working days from Order Confirmation, Artwork Approval and Payment.

Production: 4-5 weeks from Order Confirmation, Payment and Product Sample Approval.

We are capable to handle urgent orders. You are welcome to enquire with detail requirement by email: [email protected] or phone: 1300 786 168.

Delivery and Title

Delivery of Goods will take place at the Delivery Address specified by the Customer during the Order process. We shall at the Customer’s expense deliver the goods to this address.

If there is no one available at the Delivery Address to accept delivery, or there is limited access to the Delivery Address or it is unsafe or impractical to make delivery, a calling card will be left for the Customer. It is the Customer’s responsibility to follow the instructions stated on the calling card.

Where the Customer do not collect your Goods or call the Courier Company within 5 days of a failed delivery, it may cause return of the Customer’s Goods and re-delivery. If Goods are required to be redelivered, the Customer will be required to pay any associated fees for redelivery.

The Customer may nominate to have the parcel left without a signature (e.g. on door step). However, if the Customer do so, the Customer understand and agree that our selected couriers are permitted to leave the Order without obtaining a signature, therefore we and our couriers are released of all responsibility and liability for the Orders left unattended.

Please note that it might not be possible for us to deliver to some locations. If this is the case, we will inform the Customer and arrange for cancellation of the Order or delivery to an alternative delivery address.

Upon delivery, the Customer must inspect your Goods and check that the Goods delivered match your Order. If the Customer find any damage, missing, faulty or incorrect goods, the Customer need contact our Customer Service Team as soon as possible on 1300 786 168 (Australia Customer) or 0061 2 9671 5929 (Customer outside Australia) and email us at [email protected] referring to official invoice number and date, and state what happened on the Goods. If you request return of goods, please refer to our Returns Policy at below.

Returns & Claims

All return goods must be authorized by the Company. The Customer shall email the Company at [email protected] of any claim within 14 days after the receipt of Goods.


Return of Defective Goods

Breelyn Uniforms gives up to 90 days warranty against manufacturer defects and quality failure. This warranty does not cover general wear and tear from use, other accidents or incidents. 

If the Goods are defective or fail to be of acceptable quality, the Company will repair or replace the goods or any part of them that is defective at our discretion.

The Customer should follow up the Garment Care Instruction on each garment. 

The Company offer Free Return service for defective Goods. After return request is authorized by the Company, the Customer can return the defective Goods at local Post Office by using Reply Paid Form provided by the Company for free return.

If you have received Goods with defect, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] referring to official invoice number and date, and state what happened on the Goods within the warranty period. Our Customer Service team will contact you within 2 business days after received your email. We may request you to provide one photo or two showing the defect/fault, which will speed up the returns process for you.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number and Reply Paid Form as a pdf. Return Authorization Number is valid for 2 weeks. Print this Reply Paid Form off and attach it to your return parcel.

Step 3: Drop off your package at any Australia Post office for free return.

Step 4: We will make inspection after receipt of the Goods and will contact you with the solution on the defects.

Step 5: After repair or replacement of the Goods, we will send the Goods back to you at our own expenses.

The Company’s liability, implied warranty or condition is limited to the replacement or repair of Goods at the Company’s sole discretion.

 

If You Changed Your Mind

We will not accept return or exchange of Goods already decorated or with Special Sale Terms, such as Special or Clearance Goods. We will not accept return or exchange of items that custom made or produced through indent.

The Customer can request return of Goods other than above. There is minimum $15 restocking fee to apply.

 If you want to return the Goods simply because you changed your mind, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] within 7 days after the receipt of Goods, referring to official invoice number and date, and state reason for return. Our Customer Service team will contact you within 2 business days after received your email.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number which is valid for 2 weeks.

Step 3: Return the Goods to the Company. Please enclose Return Authorization Number, Copy of Invoice with your return Goods and address to:

Breelyn Uniforms Returns Centre
PO Box 423, Doonside NSW 2767.
Australia

Freight cost for return of purchased Goods will be the responsibility of the Customer. If the return parel does not reach us safely, we cannot complete the Refund or Credit procedure, so please send via trackable or registered post.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: For return Goods with sound condition, we will proceed to Refund or Credit into your account. The Freight cost in original order is non-refundable.

Refunds are processed within 5 business days after receipt of the Goods. You'll receive a confirmation email once your refund or exchange is done!

For Credit Card or PayPal payment, refund will be credited into the same account your payment came from.

If You Want to Exchange for Different Size or Different Goods.

We will not accept return or exchange of Goods already decorated or with Special Sale Terms, such as Special or Clearance Goods. We will not accept return or exchange of items that custom made or produced through indent.

The Customer can request exchange of Size or Goods other than above. There is minimum $15 restocking fee to apply.

If you would like to exchange for a different size or different Goods, you need to return your purchase to initiate a refund and place a new order as following:

Step 1: The Customer shall email the Company at [email protected] within 7 days after the receipt of Goods, referring to official invoice number and date, and state reason for return. Our Customer Service team will contact you within 2 business days after received your email.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number which is valid for 2 weeks.

Step 3: Return the Goods to the Company. Please enclose your Return Authorization Number, Copy of Invoice with your return Goods and address to

Breelyn Uniforms Returns Centre
PO Box 423, Doonside NSW 2767.
Australia

Freight cost for return of purchased Goods will be the responsibility of the Customer. If the return parcel does not reach us safely, we cannot complete the Refund or Credit procedure, so please send via trackable or registered post.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: For return Goods with sound condition, we will proceed to Refund or Credit into your account. The Freight cost in original order is non-refundable.

Refunds are processed within 5 business days after receipt of the Goods. You'll receive a confirmation email once your refund is done!

For Credit Card or PayPal payment, refund will be credited into the same account your payment came from.

If Part of the Goods are Missing

If you find parts of the Goods missing, please follow the procedure at below for re-supply:

Step 1: The Customer shall email the Company at [email protected] within 14 days after the receipt of Goods, referring to official invoice number and date, and state what Goods are missing in the delivery. Our Customer Service team will contact you within 2 business days after receipt of your email. The Customer shall check the Goods thoroughly and carefully before claim.

Step 2: After the assessment, the Company will re-supply the missing Goods within normal delivery time.

If Received Goods Are Incorrect

If you find the received Goods are incorrect, please follow the procedure at below for return:

Step 1: The Customer shall email the Company at [email protected] within 14 days after the receipt of Goods, referring to official invoice number and date, and state incorrect Goods in delivery. Our Customer Service team will contact you within 2 business days after received your email. We may request you to provide one photo or two showing the Goods that are incorrect, which will speed up the returns process for you.

Step 2: After the assessment, you will receive an email from Customer Service team with Return Authorization Number and Reply Paid Form as a pdf. Return Authorization Number is valid for 2 weeks. Print this Reply Paid Form off and attach it to your return parcel.

 

Step 3: Drop off your package at any Australia Post office for free return.

Step 4: All goods will be inspected on return. All return Goods should be in re-saleable condition:

- All tags must be attached.
- All package in original condition.
- Products must not have been worn, used, laundered or altered in any way.

Step 5: We will re-supply the right Goods for replacement at our own expenses.

For any queries, please contact our Customer Service Team on 1300 786 168 (Australia Customer) or 0061 2 9671 5929 (Customer outside Australia) and email us at [email protected].